PulsesPlus^TM Batteries and HLC

High Energy - High Power

PulsesPlus^TM Batteries and HLC

Stand alone equipment using GSM modules is a challenge for the power source. It must provide both high current pulses and long service life. The PulsesPlus™ technology overcomes the shortcomings of conventional solutions by combining Tadiran Batteries primary batteries with one or more Hybrid Layer Capacitors.

PulsesPlus-Batteries are ideal for applications requiring long life
and high energy under high current pulse requirements.

Our catalogue might be helpful

PulsesPlus-Batteries are ideal for applications requiring long life
and high energy under high current pulse requirements.
These applications include:

Emergency roadside assistance systems
Asset, container and cargo tracking devices and locating devices
Stand-alone equipment using GSM and GPS technologies
AMR utility meters, remote meter reading
Sonar buoys, oceanographic equipment
RFID devices, toll tags, transponders
Communications equipment
Emergency and medical devices

Model	Termination	Configuration Primary cell	HLC	Nominal voltage	Nominal capacity	Max. 1 s pulse to 3 V	Dimensions in mm
TLP-91111/A/SM	Flying leads	AA	1550	3.6v	2.40 Ah	3 A	55 × 32 × 16
TLP-91311/A/SM	Pressure contacts	AA	1520	3.6v	2.40 Ah	1 A	Ø 16.5 × 75
TLP-91311/A/ST	Solder tags	AA	1520	3.6v	2.40 Ah	1 A	Ø 16.5 × 75
TLP-92111/A/SM	Flying leads	C	1550	3.6v	8.50 Ah	3 A	55 × 44 × 28
TLP-92311/A/SM	Flying leads	C	1520	3.6v	8.50 Ah	1 A	Ø 29 × 67
TLP-93111/A/SM	Flying leads	D	1550	3.6v	19.0 Ah	3 A	64 × 50 × 35
TLP-93311/A/SM	Flying leads	D	1520	3.6v	19.0 Ah	1 A	Ø 34 × 78
TLP-96111/A/SM	Flying leads	1/2 AA	1550	3.6v	1.2 Ah	3 A	55 × 32 × 16
TLP-96311/A/SM	Pressure contacts	1/2 AA	1520	3.6v	1.2 Ah	1 A	Ø 16.5 × 50
TLP-96311/A/ST	Solder tags	1/2 AA	1520	3.6v	1.2 Ah	1 A	Ø 16.5 × 50
TLP-97111/A/SM	Flying leads	2/3 AA	1550	3.6v	1.6 Ah	3 A	55 × 32 × 16
TLP-97311/A/SM	Pressure contacts	2/3 AA	1520	3.6v	1.6 Ah	1 A	Ø 16.5 × 58
TLP-97311/A/ST	Solder tags	2/3 AA	1520	3.6v	1.6 Ah	1 A	Ø 16.5 × 58

Hybrid Layer Capacitors for use in PulsesPlus-Batteries

Hybrid Layer Capacitors are a kind of rechargeable battery. They are used as a capacitor in PulsesPlus batteries, where they are connected in parallel to Tadiran Lithium Batteries. The electrodes of HLC’s comprise lithium intercalation compounds. They have low impedance and can deliver high current pulses. The performance and reliability properties of HLC’s have been carefully optimized to match those of Tadiran Lithium Batteries. The result is a battery with a maximum of both energy and power density for stand alone use of up to 25 years.

HLC’s are normally charged to 3.6 V, optionally to 3.9 V.

Excellent shelf life (10 years)
Extremely low self-discharge (1 % or less per year)
Suited for long-term use with low current
For operation at low current levels with long stands
Intermittent discharge with medium current level provided the average is not below the active current
Temperature range from -55 °c to +85 °c

Type	Max. charge voltage	Max. charging current	Max. cont. dis- charge current	Max. pulse dis- charge current	Max. capacity (3.67 V)	Max. capacity (3.9 V)	Dis- charge end voltage	Cell impe- dance	Dimensions in mm
HLC-1020	3.95 V	8 mA	0.25 A	0.75 A	12.5 mAh	20 mAh	2.5 V	≤ 400 mΩ	Ø 10 × 20
HLC-1020L	3.95 V	6 mA	0.15 A	0.5 A	8 mAh	12.5 mAh	2.5 V	≤ 600 mΩ	Ø 10 × 20
HLC-1020P6	3.95 V	8 mA	0.25 A	2 A	3.5 mAh	5 mAh	2.5 V	≤ 200 mΩ	Ø 10 × 21
HLC-1520A	3.95 V	25 mA	0.5 A	2 A	39 mAh	58 mAh	2.5 V	≤ 250 mΩ	Ø 15 × 20
HLC-1530A	3.95 V	50 mA	0.75 A	3 A	70 mAh	105 mAh	2.5 V	≤ 140 mΩ	Ø 15 × 27
HLC-1550A	3.95 V	100 mA	2 A	5 A	155 mAh	236 mAh	2.5 V	≤ 100 mΩ	Ø 15 × 50

Do you need any further information?

PulsesPlusTM Batteries and HLC

High Energy - High Power